Madeni Yağ Testleri

Mineral yağ, benzin ve diğer petrol ürünlerin üretilmesi için ham petrolün rafine edilmesinden elde edilen renksiz, kokusuz bir sıvıdır. Mineral yağlar; tıp, veteriner, kozmetik, mekanik, elektrik ve endüstriyel, gıda ve farklı birçok alanda kullanılmaktadır.

Nanolab Laboratuvarlar Grubu olarak Madeni Yağlarda birçok test ve analiz gerçekleştirmekteyiz.

- Katkı Elementleri, Aşınma Metalleri ve Kirletici Miktarlarının Tayini: (Aluminyum (Al); Bakır (Cu); Baryum (Ba); Bor (B); Çinko (Zn); Demir (Fe); Fosfor (P); Gümüş (Ag); Kadminyum (Cd); Kalay (Sn); Kalsiyum (Ca); Krom (Cr); Kurşun (Pb); Magnezyum (Mg); Mangan (Mn); Molibden (Mo); Nikel (Ni); Silisyum (Si); Sodyum (Na); Titanyum (Ti); Vanadyum (V))
- Toplam Asit Sayısı (TAN) Tayini
- Görünüm Tayini
- Kül Tayini
- Toplam Baz Sayısı (TBN) Tayini
- Yoğunluk (15°C) Tayini
- Parlama Noktası Tayini
- FTIR Spektrum Tayini (Soot, Oxidation, Nitration, Sulfation, Water, Glycol, Diesel, Gasoline, ZDDP)
- Partikül Sayısı / Yağ Kirliliği Tayini
- Poliklorlubifenillerin (PCBs) Tayini
- Akma noktası
- Vizkozite İndeksi
- Kinematik Vizkozite ( 40°C de )
- Kinematik Vizkozite ( 100°C de)
- Su Tayini (% V/V)
- Su Tayini - Karl Fischer (ppm, %)
- Tortu ve Çözünür Çamur Tayini

Madeni Yağ Tayini kapsamındaki referans standartlar:
- ASTM D5185: Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- ASTM D 664: Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D 482: Standard Test Method for Ash from Petroleum Products
- ASTM D 974-02: Standard Test Method for Acid and Base Number by Color-Indicator Titration
- ASTM D 4052: Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- ASTM D 93: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- ASTM E 2412: Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- ISO 4406: Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
- ISO 4407: Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope
- TS EN 12766-1: Petroleum products and used oils- Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
- TS EN 12766-2: Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content
- ASTM D97: Standard Test Method for Pour Point of Petroleum Products -- eLearning Course
- ISO 3016: Petroleum and related products from natural or synthetic sources - Determination of pour point
- ASTM D 2270: Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
- ISO 3733: Petroleum products and bituminous materials — Determination of water — Distillation method
- ASTM D 6304: Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- ASTM D 1698: Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils

Mineral Yağ Analizleri için Nanolab Çevre Analiz Laboratuvarı ile iletişime geçebilirsiniz.