Chemical Analysis Performed on Water Sample

Water is needed throughout our entire life. It is used in all areas, especially in consumption and cleaning. It is obligatory to perform test and analysis processes in the water offered to the consumer as drinking water or utility water.

- Microbiological tests
- Physical tests
- Chemical tests

The Chemical Tests performed on water samples within the scope of Nanolab Water Analysis Laboratory are as follows.
- Aluminum (Al), Antimony (Sb), Arsenic (As), Copper (Cu), Barium (Ba), Mercury (Hg), Zinc (Zn), Silver (Ag), Cadmium (Cd), Determination of Cobalt (Co), Chromium (Cr), Lead (Pb), Manganese (Mn), Molybdenum (Mo), Nickel (Ni), Selenium (Se), Vanadium (V)
- Boron (B), Determination of Iron (Fe), Phosphorus (P), Tin (Sn), Calcium (Ca), Lithium (Li), Magnesium (Mg), Potassium (K), Sodium (Na), Strontium (Sr)
- Determination of Ammonium
- Determination of Nitrite/Nitrite Nitrogen
- Determination of Nitrate/Nitrate Nitrogen
- Determination of Alkalinity
- Determination of Free Chlorine
- Determination of Chloride
- Total Determination of Chlorine
- Determination of Salinity
- Determination of Oil and Grease
- Determination of Chloride
- Determination of Fluoride
- Determination of Sulphate
- Determination of Total Hardness
- Determination of Hardness

Reference standards within the scope of Chemical Analysis in Water:
- SM 3030 E: Nitric Acid Digestion of Metal Samples
- EPA 200.8: Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry
- TS EN ISO 17294 1-2: Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes
- TS 7159: Water Quality-Determination of Ammonium- Part 1: Manuel Spectrometric Method
- SM 4500-NO2- B: Nitrite by Colorimetry
- SM 2320 B: Alkalinity by Titration
- TS 5489 EN ISO 7393-1: Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine
- TS 4164 ISO 9297: Water quality-Determination of chloride silver nitrate titration with chromate indicator (mohrs method)
- SM 2520 B: Salinity
- SM 5520 B: Oil and Grease by Partition-Gravimetric Method
- SM 4500-Cl⁻B: Chlorine by Iodometry
- SM 4500-F B: : Fluoride
- SM 4500-F D: Fluoride
- SM 4500 SO42- E: Sulfate – Turbidimetric Method
- SM 2340 C: Hardness
- SM 2340 B: Hardness